Free Energy Devices - Patrick Kelly

[usselo]

Hey Timeshifter,

I tried to replicate the "battery" with the materials below but I can't get anything out of it. I put in water before the attempt too.

Euro cent coins are only 89% copper so maybe that's the problem?

Coins of that level of copper should work fine. Your water needs to be acid though. It needs to be water-vinegar mix or water-pure lemon juice mix (Jif juice works fine). The water only needs to be a bit acid for you to get a voltage. After that you can experiment to see:

• What difference the water-vinegar ratio makes to available voltage
• What difference the water-vinegar ratio makes to available current

You'll need a multimeter or battery tester obviously...

Edit: Just saw those are magnets... forget my advice above unless you are using copper coins and milk bottle tops

 

[Timeshifter]

Hey Timeshifter,

I tried to replicate the "battery" with the materials below but I can't get anything out of it. I put in water before the attempt too.

Euro cent coins are only 89% copper so maybe that's the problem?

View attachment 14091​

View attachment 14093​

Could be, I used copper sheet, and zinc washer. If the paper is dry, no good, or wrong order of materials, or bad connections.

 

[luddite]

All different metals give voltage. Nothing new.

What do you mean "give"?

 

[AntiSoof]

What do you mean "give"?

A current flows naturally between two different metals

 

[Jd755]

Eric Dollard explained this in a video interview he gave its one of the ones with techzombie I think. But this chap makes it crystal.

View: https://www.youtube.com/watch?v=bHIhgxav9LY
​

 

[3D Printing Bear]

I followed one of Nigel Cheese vids.

Neodymium Magnet N/S, zinc washer, wet paper, copper, repeat x 9 or 12.

Paper has to remain damp or it does not work, same with graphite paper. Size of magnets made zero difference to output voltage.

Power remains as long as paper remains damp. However after 2 days corrosion began on the magnets.

Figure out a material to replace wet paper & this is free energy device. Electricity from magnet, zinc, copper.

View attachment 14087​

Nice work on this! I bought copper and zinc rod & foil in order to experiment with Nigel's "quantum battery" more. I'd really like to start testing other materials this winter in order to see if I can get something that doesn't need to stay wet, if possible....


What I'm more excited about building is Nigel's 'Kinetic Linear Motor' (KLM) which just uses magnetic push and pull force in the right orientation to create movement. If I actually get it to work my goal is to create a video like someone here recommended, where I would show it working, then take the whole thing apart and chop up the 3D printed parts in one shot to show it's just magnets and plastic, and maybe some bearings. =]

 

[luddite]

Nice work on this! I bought copper and zinc rod & foil in order to experiment with Nigel's "quantum battery" more. I'd really like to start testing other materials this winter in order to see if I can get something that doesn't need to stay wet, if possible....


What I'm more excited about building is Nigel's 'Kinetic Linear Motor' (KLM) which just uses magnetic push and pull force in the right orientation to create movement. If I actually get it to work my goal is to create a video like someone here recommended, where I would show it working, then take the whole thing apart and chop up the 3D printed parts in one shot to show it's just magnets and plastic, and maybe some bearings. =]

This is the path to truth. No one should care about money. As a bear you would understand that taking that ticket falls into a certain small hat playbook which seems to shorten one's life considerably.

 

[3D Printing Bear]

This is the path to truth. No one should care about money. As a bear you would understand that taking that ticket falls into a certain small hat playbook which seems to shorten one's life considerably.

Amen, I know exactly where the love of money leads and want nothing to do with it. Ironically I'm considered small-hat "by blood" but thankfully was raised not even knowing until I was a teen and then didn't really care.

I did manage to get ~6.5V out of a 10 cell battery built according to the base specs Nigel has put out. I had some 3/8" x 1/16" N35 magnets and cut 3/8" discs of zinc & copper foil, then wettened paper (white printer type) discs in between. It turns out thickening the wet paper portion ups the voltage some, same with increasing the amount of copper. Oh I also got it to work with a wet piece of bark which was interesting, but one cell still put out ~0.5V. It's entertaining to experiment with and I was pretty thrilled to get voltage on my first try. =]

 

[Citezenship]

View: https://youtu.be/HY0rZZV7x6A

 

[Justtheg]

The meter creates the financial charge. Electricty will flow when the circuit is complete. Hop I am not telling you how to suck eggs but often the obivious is ignored to our detriment. The swicth being the evidence of this. Break the circuit and there is no electrical flow.

The HV lines hang from huge ceramic insulators. This alone show one where the charge is flowing. It isn't from pylon to wire or wire to pylon.
The HV line is not for show at all. Seems I am not making myself clear, isn't the first time.

The grid is a set of HV lines a network if you will that circulates electricity within itself. When a switch from the HV at transformer level gets turned electricity flows to the transformer and through to end user. If demand goes up and the line from transformer shows an increase that may be too much for the transformer to handle another transformer is turned on and another HV line goes live.
There are HV switching stations around the grid which direct electricity to where it is needed. One in England I think caught fire earlier this year and it was one connected to one of the French interconnectors. Should a couple of such incidents occur simultaneously its goodby grid.

If one were to have one of these high voltage transmission lines near their home could they "siphon" some electricity using a device, electric coil, or something?

Also if "the grid" were to go down what would be some plausible uses for the infrastructure that is still up/what else would be needed to make use of it?

 

[luddite]

Update on Patrick Kelly that I just came across. Seems he started a company and got done with fraud. I finished reading his book again and have been looking into the HHO electrolysis. I think that this approach may be fruitful as thousands have done a great job of it on youtube.

1. Get a solar array and use that for water electrolysis using graphite electrodes
2. Capture the H² and O² separately (many designs exist to show this)
3. Use the solar to power a compressor and store them in separate tanks for controlled usage
4. Modify an engine timing and inject and ignite as per gasoline would run an engine usually

I know with 100% certainty that none of what I describe above is free energy but with the cost of old solar panels being easily and cheaply obtainable, and all processes being simple and well-known, then this becomes a sane approach for running an engine for either driving or powering your house at night.

Genesis World Energy​

At the turn of the millennium, a company called Genesis World Energy announced that they were developing a device that would harness energy from water by separating the hydrogen and oxygen atoms and then recombining them. In 2003, the company claimed that its technology was ready and would soon be deployed in automobiles. Under the garb of these highfalutin claims, the company managed to collect 2.5 million dollars from investors for operations. Investors later realized that none of their devices were deployed in any automobile… they were being duped! Patrick Kelly, the owner of Genesis World Energy, was found guilty of fraud and sentenced to five years in prison.

 

[Udjat]

I don't know if anyone has mentioned Joseph Newman in this thread, I just saw this thread and had to respond.
Joseph Newman had a wonderful free energy machine that would have changed the world. There is a documentary about him that the Vice channel put out, and I recommend to anyone a look see! There are all kinds of docs about him, but I think that the Vice version is important to watch.

This man and his friends and even scientist that had come from all around to look at his work were plagued with death threats.

I am not a big fan of Elon Musk and most of these independent "researchers". Elon Musk stole the title of the electric motor and all the romanticism of an electrical motor from Tesla, even though people think that he was a fake. I don't like it when people pretend to give homage to someone that had been ridiculed by so many for their invention(Tesla), and then make bank off of their design after they have gone and can no longer defend their inventions and pattens.

These "new age" thinkers are, to me, not thinking at all, and totally making you think that they are on the brink of excellence, innovators, and the voice of the future, which is crap.

What it would be like to have wireless power, and a wonderful perpetual motion machine!!!!! The elite only see these people as liabilities and they get rid of them by either making them look like they are crazy or the other alternative which is death. The elite only care about how deep their pockets go.

Another thing I don't understand is why is the simple hydro power not used anymore????? I live in New England and I am surrounded by rivers. When I look at old pictures of these towns I see mills everywhere. And what did they use? Hydro power. Houses along the rivers took advantage of the rivers' power and used it. That doesn't sound to off the beaten path for me!

It's things like this that you realize it is all a money game, and all these wonderful, clean energy ideas are shot down because of the elite and big corporations.

 

[Timeshifter]

Today I made the Joule theif and it works.

Not charged anything with it as yet, but a flat (0.5v) 1.5 v tripple A battery powers 4 led's no sweat. Will see how long it lasts.

 

[Jpisow]

This book is in 2 formats, pdf and epub for your reading pleasure.

It contains 36 detailed designs of free energy devices. You can build these at home the author claims.

He also has a website but the book is much more detailed. Wayback link

Awesome, thank you for this.

 

[laanehunt]

I followed one of Nigel Cheese vids.

Neodymium Magnet N/S, zinc washer, wet paper, copper, repeat x 9 or 12.

Paper has to remain damp or it does not work, ...

I confirm, that indeed it works. However with some fluctuations, probably because uneven material thickness, roundness of the metal sheets possibly etc. I didn't have an even copper, zinc, paper thickness. Magnets I used are a bit overpowered as well compared to some video I saw which told the magnets to have only 0.5 mm in height. Needs some more tuning and experimentation.

Thanks for the tip @Timeshifter about dampness. I already gave up for this project. But this tip saved it.

Also another interesting connection, the Ewaranon video (History of Plane earth) which showed a lot of ancient tech energy buildings to be near or next to a water source. Water - here's our first clue I suppose.

Video I came across to get the idea to build this little science experiment:

View: https://t.me/RevealedEye/1637

I didn't precisely build it 1:1 by the thing showed in the video as it didn't say all the details (all the dimensions of magnets, copper thickness etc.) for it. And it didn't mention anything about the paper to have to be damp. So looks like another half the truth.

 

[3D Printing Bear]

I confirm, that indeed it works. However with some fluctuations, probably because uneven material thickness, roundness of the metal sheets possibly etc. I didn't have an even copper, zinc, paper thickness. Magnets I used are a bit overpowered as well compared to some video I saw which told the magnets to have only 0.5 mm in height. Needs some more tuning and experimentation.

Thanks for the tip @Timeshifter about dampness. I already gave up for this project. But this tip saved it.

I didn't precisely build it 1:1 by the thing showed in the video as it didn't say all the details (all the dimensions of magnets, copper thickness etc.) for it. And it didn't mention anything about the paper to have to be damp. So looks like another half the truth.

I've got quite a few videos working with Nigel's quantum battery tech which may be helpful if you want to pursue it more. I'm working on several ways to maintain the water within each cell and have one that's ~40 days old now and still working just fine: Nigel Cheese's Quantum Battery - New Design at 490+ hours and still going & Update Someone else I'm working with who isn't on this forum has a single cell that's still working at 70+ days now and is just operating off of atmospheric moisture currently. =]

 

[laanehunt]

I've got quite a few videos working with Nigel's quantum battery tech which may be helpful if you want to pursue it more. I'm working on several ways to maintain the water within each cell and have one that's ~40 days old now and still working just fine: Nigel Cheese's Quantum Battery - New Design at 490+ hours and still going & Update Someone else I'm working with who isn't on this forum has a single cell that's still working at 70+ days now and is just operating off of atmospheric moisture currently. =]

Thanks, much appreciated!

I watched the videos and I'm very impressed by how methodically you approach on this subject to replicate things. I'm pursuing my own projects but nothing found yet. I'll try to replicate you water cell, but now I'm also interested in that atmospheric humidity method you mentioned. Looking forward on your discoveries.