Exploring the technology of Prof. Nigel Cheese: Quantum Battery

I managed to film a shorter video with some research and development updates on the quantum battery, which I hope to follow up on fairly soon: Nigel Cheese's Quantum Battery - R&D Update and measuring amps

I have some super capacitors that I ordered and get to pick up at the post office today which I am very excited to try testing with. Those will allow me to begin running larger and more practical loads and actually turn a motor. The interesting part is that the QB puts out effectively no useful amps even at higher voltages and sizes, but that's because it's not putting out electricity, at least not entirely. Yet when connected to a capacitor the QB charges it up, and well beyond the voltage limit, all regardless of polarity and in repetition.

Now I just need time to build larger batteries with the newer method & materials, then go grab my capacitor assortment to begin more testing with them. More to come!
 
I managed to film a shorter video with some research and development updates on the quantum battery, which I hope to follow up on fairly soon: Nigel Cheese's Quantum Battery - R&D Update and measuring amps

I have some super capacitors that I ordered and get to pick up at the post office today which I am very excited to try testing with. Those will allow me to begin running larger and more practical loads and actually turn a motor. The interesting part is that the QB puts out effectively no useful amps even at higher voltages and sizes, but that's because it's not putting out electricity, at least not entirely. Yet when connected to a capacitor the QB charges it up, and well beyond the voltage limit, all regardless of polarity and in repetition.

Now I just need time to build larger batteries with the newer method & materials, then go grab my capacitor assortment to begin more testing with them. More to come!
Good work. I was wondering - can you use the battery intermittently, over the course of a month for example and still get the same battery life?

I think the water in the QB cells could possibly be transforming into what Gerald Pollack refers to as 'EZ water' (aka hexagonal water/ structured water/H3O2/gel water);

View: https://youtu.be/i-T7tCMUDXU

The Fourth Phase of Water: Dr. Gerald Pollack at TEDxGuelphU​


He talks about how EZ water is formed in layers next to a hydrophilic surface (all metals are hydrophilic I think).-
Screenshot_2022-06-04_23-43-47.png

and describes how free energy can be generated from EZ water. (The water is also exposed to sunlight)-
Screenshot_2022-06-04_23-51-00.png

I think this may also possibly explain (one of) the purposes starforts may have been used for. (The starfort in St Petersburg for example has what look like copper connection points near the base of the outer walls facing the water). this technique could also potentially purify and desalinate the water. I'm sure there were also other effects going on with starforts' precise design and geometry, probably a combination of things.

Spring water is structured water. Blood plasma is too (makes me wonder how the graphene in the covid jabs, etc. is interacting with blood plasma electromagnetically). It can also be made by vortexing water.

It makes me wonder if the QB would perform any differently if exposed to sunlight (if you could 3D print clear O-rings, I don't know if that's easy). Also exposing the QB to audio frequencies? Just an idea though.

Gerald Pollack's site - Pollack Laboratory | EZ Water | University of Washington



View: https://youtu.be/pb_1xTBkoE0

Water & Sound trick​

(an example of diy water sound experiment)


Water is strange stuff. Here are some related videos from various water researchers and scientists.-


View: https://youtu.be/1qQUFvufXp4

Masaru Emoto - Water Experiments​


View: https://youtu.be/ayX1WmTmy4g

Veda Austin - Structures of water​

(pictures appearing in sheets of ice)


View: https://youtu.be/R8VyUsVOic0

Water Memory (2014 Documentary about Nobel Prize laureate Luc Montagnier) 54mins​

 
I know some on this forum are familiar with Nigel Cheese, aka (Nigel C. Hands, Nigel Cooper), but if not then I recommend researching his presentations and content, ideally with an open mind to your understanding of physics. If you don't have time to research him for yourself, or are too lazy, I'll provide a VERY brief synopsis: Roughly 40 years ago Nigel C. Hands was a brilliant young man (207 IQ) in the British Royal Navy who around that time gave a presentation to the Navy elite based on his discoveries around the true nature of magnetism, beyond our current physics and mathematical understanding. They did not receive it well nor graciously and took his work then told him to not tell anyone else about it. 35 years later he re-recorded that presentation for the world to see, and since then he has been active (mostly on LinkedIn) sharing his research, technology, and experiments trying to show everyone that energy is free for the taking. It sounds like he has gone through many hardships at the hands of the British Royal Navy as well as NATO who he worked for many years with. I don't know the details of his personal sufferings trying to bring his findings and technology to fruition, but I do know all of it is for the benefit and building up of humanity and not the controlling or destruction of it, and I find that highly admirable.

If you want the same introduction to Nigel that I had, then I suggest you watch the ~1 hour presentation that he gave to the British Navy 40+ years ago: Nigel Cheese - 1+1=1 (Full Presentation)

The big question is of course: Is he "for real" and telling the truth or not? I aim to prove him truthful or not by working with what he has shared of his technology to build and test each one for myself to verify (actual science kids!), and I hope to share parts of the journey. :)

That was a long intro to get to this first bit of tech that I began with: The Quantum Battery (QB for short), which I picked because it was frankly the quickest, simplest, and least expensive for me. I still haven't heard or read a specific reason Nigel calls it a "quantum battery" but I figure a man with a 207 IQ and his own Relativity Theorem has a good reason, and can call it whatever he wants. Although likely he's calling on the familiar physics concept of a quantum battery which theoretically puts out power forever and does not run out. I believe Nigel has done that in his lab, however I have not replicated a fully "dry" QB as of yet. Ideas from readers here are MORE than welcome though!

What is Nigel's Quantum Battery: In the most basic form its two small thin magnets with zinc, damp/wet paper, and copper sandwiched in between, ideally with the paper soaked in a 5 - 10% magnesium solution. I found that adding in an actual thin piece of magnesium ribbon strip between the paper and zinc gave a significant boost in voltage. In further experimenting I've learned many factors play into the QB performance, hence it's a new technology in need of proper development. The materials chosen, their thickness & density, their polar and axial alignment, the water/solution soaking the paper/cellulose layer; all of these are factors I've seen the changes in first hand. I've even replaced the copper for cheap pyrolytic graphite and tried aluminum foil to replace the magnesium all to different effects. Currently the highest voltage I'm seeing is from this layer combo for a single cell: [magnet, pyrolytic graphite, wet/damp cardstock, magnesium, zinc, magnet] Simple stack on in the same order to increase voltage. [NOTE: I only got to ~1.8V on a cell after aligning the magnets and materials. hint, zinc should be 90 degree to graphite or copper layer]

Surely at this point some of you have asked yourself "what about the amps/amperage?", to which I'll say it is (almost predictably) small, i.e. mirco/milli-volt range. To those bummed by this I would have you open your mind to the idea that these batteries are not producing traditional electricity. From what I understand so far there is energy transfer that does not follow the normal electrical laws many of us know and love. I'll demonstrate ways that's true in another video & update to this post. All the LEDs randomly attached to a 38V QB in the last few photos illustrate how the energy is different. In Nigel's book he describes a similar device as having two reactions going on: "Galvanic Transfer (Electron Transfer) and Magneto Positronic Transfer" This complex energy flow allows me to light an LED with a 25V+ QB using my body to complete the circuit. I think it may be what Tesla was working with....

Here is the list of materials and tools I've been using:

Copper Foil - Amazon.com

Zinc Foil - Amazon.com

Magnesium Ribbon - https://www.amazon.com/gp/product/B01I9CDW50

Pyrolytic Graphite - 300-1200W/mK Pyrolytic Graphite Sheet High Thermal Conductivity No Insulation | eBay

3/8" x 1/32" N52 magnets - 3/8 x 1/32 Inch Neodymium Rare Earth Disc Magnets N52 (100 Pack)

Paper/Cardstock - This can be found, bought or salvaged from countless sources. This is also the material that I think needs the most experimenting with to find a dry material that does not need wetting.

Water (Distilled or not) - Again this can be found or bought many places. Distilled water seems to cause less corrosion to the magnesium strip and copper, which appears to degrade voltage over time.

Hole Punch - Amazon.com

Magnetic Viewing Film - https://www.amazon.com/CMS-MAGNETICS-Magnetism-Applicable-Including/dp/B000UV6ZPS


I have built, taken apart, and rebuilt many QBs so far in the last 3+ months and after proving it out enough I decided to film a video building and testing one to put online. Here are a few places to view that video if you want to watch, it's ~18 minutes, single-take, and I kinda ramble on in it, but you'll definitely see everything involved in building a quantum battery for yourself:

QB Build and Test - GabTV Link
QB Build and Test - Rumble Link
QB Build and Test - Brighteon Link

In addition to the video I have been taking photos along the way of various build sizes, materials, voltages, and lighting up different LEDs. These photos are of my latest build size & materials, starting with a single 'cell' and building up from there. I wish the voltage increase was linear but at a certain point/size you see a drop-off of voltage per cell across the whole battery.



If you made it all the way through and are intrigued I suggest looking up Nigel and his technology for yourself, and/or getting the materials to build one of these at home and see for yourself. I think there's world changing potential hidden away within all this. =]
"In the most basic form its two small thin magnets with zinc, damp/wet paper, and copper sandwiched in between, ideally with the paper soaked in a 5 - 10% magnesium solution." Thank you for the hints you have provided about QBs. Have you tried dry materials in place of wet paper or water in an O ring? If so what would you recommend?
 
I know some on this forum are familiar with Nigel Cheese, aka (Nigel C. Hands, Nigel Cooper), but if not then I recommend researching his presentations and content, ideally with an open mind to your understanding of physics. If you don't have time to research him for yourself, or are too lazy, I'll provide a VERY brief synopsis: Roughly 40 years ago Nigel C. Hands was a brilliant young man (207 IQ) in the British Royal Navy who around that time gave a presentation to the Navy elite based on his discoveries around the true nature of magnetism, beyond our current physics and mathematical understanding. They did not receive it well nor graciously and took his work then told him to not tell anyone else about it. 35 years later he re-recorded that presentation for the world to see, and since then he has been active (mostly on LinkedIn) sharing his research, technology, and experiments trying to show everyone that energy is free for the taking. It sounds like he has gone through many hardships at the hands of the British Royal Navy as well as NATO who he worked for many years with. I don't know the details of his personal sufferings trying to bring his findings and technology to fruition, but I do know all of it is for the benefit and building up of humanity and not the controlling or destruction of it, and I find that highly admirable.

If you want the same introduction to Nigel that I had, then I suggest you watch the ~1 hour presentation that he gave to the British Navy 40+ years ago: Nigel Cheese - 1+1=1 (Full Presentation)

The big question is of course: Is he "for real" and telling the truth or not? I aim to prove him truthful or not by working with what he has shared of his technology to build and test each one for myself to verify (actual science kids!), and I hope to share parts of the journey. :)

That was a long intro to get to this first bit of tech that I began with: The Quantum Battery (QB for short), which I picked because it was frankly the quickest, simplest, and least expensive for me. I still haven't heard or read a specific reason Nigel calls it a "quantum battery" but I figure a man with a 207 IQ and his own Relativity Theorem has a good reason, and can call it whatever he wants. Although likely he's calling on the familiar physics concept of a quantum battery which theoretically puts out power forever and does not run out. I believe Nigel has done that in his lab, however I have not replicated a fully "dry" QB as of yet. Ideas from readers here are MORE than welcome though!

What is Nigel's Quantum Battery: In the most basic form its two small thin magnets with zinc, damp/wet paper, and copper sandwiched in between, ideally with the paper soaked in a 5 - 10% magnesium solution. I found that adding in an actual thin piece of magnesium ribbon strip between the paper and zinc gave a significant boost in voltage. In further experimenting I've learned many factors play into the QB performance, hence it's a new technology in need of proper development. The materials chosen, their thickness & density, their polar and axial alignment, the water/solution soaking the paper/cellulose layer; all of these are factors I've seen the changes in first hand. I've even replaced the copper for cheap pyrolytic graphite and tried aluminum foil to replace the magnesium all to different effects. Currently the highest voltage I'm seeing is from this layer combo for a single cell: [magnet, pyrolytic graphite, wet/damp cardstock, magnesium, zinc, magnet] Simple stack on in the same order to increase voltage. [NOTE: I only got to ~1.8V on a cell after aligning the magnets and materials. hint, zinc should be 90 degree to graphite or copper layer]

Surely at this point some of you have asked yourself "what about the amps/amperage?", to which I'll say it is (almost predictably) small, i.e. mirco/milli-volt range. To those bummed by this I would have you open your mind to the idea that these batteries are not producing traditional electricity. From what I understand so far there is energy transfer that does not follow the normal electrical laws many of us know and love. I'll demonstrate ways that's true in another video & update to this post. All the LEDs randomly attached to a 38V QB in the last few photos illustrate how the energy is different. In Nigel's book he describes a similar device as having two reactions going on: "Galvanic Transfer (Electron Transfer) and Magneto Positronic Transfer" This complex energy flow allows me to light an LED with a 25V+ QB using my body to complete the circuit. I think it may be what Tesla was working with....

Here is the list of materials and tools I've been using:

Copper Foil - Amazon.com

Zinc Foil - Amazon.com

Magnesium Ribbon - https://www.amazon.com/gp/product/B01I9CDW50

Pyrolytic Graphite - 300-1200W/mK Pyrolytic Graphite Sheet High Thermal Conductivity No Insulation | eBay

3/8" x 1/32" N52 magnets - 3/8 x 1/32 Inch Neodymium Rare Earth Disc Magnets N52 (100 Pack)

Paper/Cardstock - This can be found, bought or salvaged from countless sources. This is also the material that I think needs the most experimenting with to find a dry material that does not need wetting.

Water (Distilled or not) - Again this can be found or bought many places. Distilled water seems to cause less corrosion to the magnesium strip and copper, which appears to degrade voltage over time.

Hole Punch - Amazon.com

Magnetic Viewing Film - https://www.amazon.com/CMS-MAGNETICS-Magnetism-Applicable-Including/dp/B000UV6ZPS


I have built, taken apart, and rebuilt many QBs so far in the last 3+ months and after proving it out enough I decided to film a video building and testing one to put online. Here are a few places to view that video if you want to watch, it's ~18 minutes, single-take, and I kinda ramble on in it, but you'll definitely see everything involved in building a quantum battery for yourself:

QB Build and Test - GabTV Link
QB Build and Test - Rumble Link
QB Build and Test - Brighteon Link

In addition to the video I have been taking photos along the way of various build sizes, materials, voltages, and lighting up different LEDs. These photos are of my latest build size & materials, starting with a single 'cell' and building up from there. I wish the voltage increase was linear but at a certain point/size you see a drop-off of voltage per cell across the whole battery.



If you made it all the way through and are intrigued I suggest looking up Nigel and his technology for yourself, and/or getting the materials to build one of these at home and see for yourself. I think there's world changing potential hidden away within all this. =]
Just came across your post and videos about Nigel Cooper Cheese QB and thank you for your efforts .

One question about dry QB , did you use graphite or graphene in between the magnets ? Could be it what is running them dry?
 
Good work. I was wondering - can you use the battery intermittently, over the course of a month for example and still get the same battery life?

I think the water in the QB cells could possibly be transforming into what Gerald Pollack refers to as 'EZ water' (aka hexagonal water/ structured water/H3O2/gel water);

View: https://youtu.be/i-T7tCMUDXU

The Fourth Phase of Water: Dr. Gerald Pollack at TEDxGuelphU​


He talks about how EZ water is formed in layers next to a hydrophilic surface (all metals are hydrophilic I think).-

and describes how free energy can be generated from EZ water. (The water is also exposed to sunlight)-

I think this may also possibly explain (one of) the purposes starforts may have been used for. (The starfort in St Petersburg for example has what look like copper connection points near the base of the outer walls facing the water). this technique could also potentially purify and desalinate the water. I'm sure there were also other effects going on with starforts' precise design and geometry, probably a combination of things.

Spring water is structured water. Blood plasma is too (makes me wonder how the graphene in the covid jabs, etc. is interacting with blood plasma electromagnetically). It can also be made by vortexing water.

It makes me wonder if the QB would perform any differently if exposed to sunlight (if you could 3D print clear O-rings, I don't know if that's easy). Also exposing the QB to audio frequencies? Just an idea though.

Gerald Pollack's site - Pollack Laboratory | EZ Water | University of Washington



View: https://youtu.be/pb_1xTBkoE0

Water & Sound trick​

(an example of diy water sound experiment)


Water is strange stuff. Here are some related videos from various water researchers and scientists.-


View: https://youtu.be/1qQUFvufXp4

Masaru Emoto - Water Experiments​


View: https://youtu.be/ayX1WmTmy4g

Veda Austin - Structures of water​

(pictures appearing in sheets of ice)


View: https://youtu.be/R8VyUsVOic0

Water Memory (2014 Documentary about Nobel Prize laureate Luc Montagnier) 54mins​


I have been wanted to reply to this since your first posted it but I've been so busy it's been difficult getting the time to type out everything. That is some GREAT stuff you shared and it very much applies to the physics going on inside one of these batteries, particularly within the water in them as I understand from interactions with Nigel. I do believe you're right in that EZ water is being formed within the N & S magnetic fields trying to resolve. In fact some of your links have inspired a whole new experimentation path I'd like to take this research in eventually that involves direct observation, measurements, and analysis of pure water within a quantum battery cell. Part of it involves your idea of exposing the water to sunlight (or even other kinds of light) to see what impact it has on the process(es) going on.

I am familiar with Dr. Emoto's work and somewhere around my house have his 'Messages in Water' book. I'm still hugely impressed by his work and try to share it with as many people as I can if the topic comes up. I had not seen or heard Veda Austin before and am pretty friggin blown away by the research she has done, wow! I knew there was a lot more to water than we know but what she's doing takes it to an entirely different level. I've heard water described as a "diamagnetic receiver" a few times now (I think from @Dielectric first actually) and I think that's highly accurate at this point. I guess it shouldn't surprise me too much that it can receive thoughts. There's loads of implications with that which I won't get into but it's fun to ponder.

I really like your idea about the use of Starforts with copper and water, it would make a great deal of sense and could theoretically give the people there clean water but they could generate power from it as well. I will be thinking about that idea going forward because is makes a great deal of sense. There could also be a cymatic element to the starforts on a harmonic level but I don't have much to back that up at the moment. I do absolutely LOVE the world of Cymatics though and studied that field off and on for 12+ years now. My wife and I have a Cymatics device from CymaTechnologies that my wife and I use almost daily it's so helpful. If I could quite my job and only do R&D on Cymatics and Magnetology I'd be a very very happy man. :) I know you can use cymatic frequencies to structure water in addition to the vortex method which would be cool to try. So much to do and try and so little time.....

Thank you for all the great links, ideas, and info! Also to answer you're first question here at the end, I currently can't use the battery intermittently as it just simply puts out a continuous (ionic) energy flow. What I'm trying to learn is all the ways that energy can be stored and used in practical applications beyond lighting LEDs. Theoretically a battery could be built that has a very long lasting effect that would continue to put out energy, in measurable volts, for a month or more. To give you an idea, with imperfect seals and using super absorbent polymer to hold in the water I lit and LED for 120 hours straight, although it was dim by the end. Time will tell how far I can take it. =]

------------------------------------------------------------------------------------------------------------------------------

"In the most basic form its two small thin magnets with zinc, damp/wet paper, and copper sandwiched in between, ideally with the paper soaked in a 5 - 10% magnesium solution." Thank you for the hints you have provided about QBs. Have you tried dry materials in place of wet paper or water in an O ring? If so what would you recommend?
I have tried a lot of different dry materials but nothing that works that same way yet. The best recommendation I've had so far came from a comment on one of my Rumble videos to YT video where a guy makes a sort of 'Polymer gel Electrolyte for Batteries' that a person could punch or cut shapes from. It's possibly too caustic/acidic however to get the same effect that is desired in the quantum battery, and it may generate actual galvanic electricity at first until corrosion of the metals prevents anything further.

So far I think the best path to a "dry" QB is one that does have pure water within a hermetic seal between the metals and magnets. Once totally sealed it dry unless broken, punctured, or taken apart. I think it's what Nigel meant in one of his QB videos where he said it was "so to say... dry." That being said I don't know at this point if a QB build is possible with absolutely only dry substances. 🤷‍♂️

------------------------------------------------------------------------------------------------------------------------------

Just came across your post and videos about Nigel Cooper Cheese QB and thank you for your efforts .

One question about dry QB , did you use graphite or graphene in between the magnets ? Could be it what is running them dry?
You're welcome! I'm happy to be able to share what I'm experimenting with.

My last reply above talks about the dry QB, but I have not been able to build one yet with only dry materials. I have found that using graphite foil as a replacement for copper foil managed to increase voltage/energy output by about 20-30% If I had access to graphene to test with that would be cool since it can apparently be diamagnetic. For now though as a material is pretty cost prohibitive for R&D. I would like to learn how to make these as cheaply yet powerful and long lasting as possible, which is always a difficult balance to get.

------------------------------------------------------------------------------------------------------------------------------

As a general update for everyone following this, I filmed another video the other night that I uploaded using the new 3D printed TPU O-Ring seals and super absorbent polymer to hold water within the battery longer: Nigel Cheese's Quantum Battery - Build & Measurements of new design (13 cells) In this one I do a lot of measurements for scientific/mathematical purposes, and as research data Nigel would like. The goal is to know exactly how much of everything went into the battery then measure how long it puts out voltage and can light an LED. My last test went for 120+ hours, although the LED was very dim by the end, but it was lit continuously the entire time. At the moment the same QB is still above 4V and lighting a LED at about 1 lux, but I'm also at 108 hours.

I'll see about uploading a short clip I also filmed where I charged up a 10V 220uF capacitor to 14V and discharge it through a tiny motor to run it for a split second, proving the energy can create motive force in addition to light. :)
 
Last edited:
As a general update for everyone following this, I filmed another video the other night that I uploaded using the new 3D printed TPU O-Ring seals and super absorbent polymer to hold water within the battery longer: Nigel Cheese's Quantum Battery - Build & Measurements of new design (13 cells) In this one I do a lot of measurements for scientific/mathematical purposes, and as research data Nigel would like. The goal is to know exactly how much of everything went into the battery then measure how long it puts out voltage and can light an LED. My last test went for 120+ hours, although the LED was very dim by the end, but it was lit continuously the entire time. At the moment the same QB is still above 4V and lighting a LED at about 1 lux, but I'm also at 108 hours.

I'll see about uploading a short clip I also filmed where I charged up a 10V 220uF capacitor to 14V and discharge it through a tiny motor to run it for a split second, proving the energy can create motive force in addition to light. :)
Thanks for the update and video, that absorbent polymer is a great idea.

Saw this MJ Pangman video the other day discussing water and crystals. It seems crystals are similar to water in that they can hold information - scientists have apparently stored video of a hummingbird in crystal then retrieved it for playback (I'd like to find the source for this, she says it was an article in Science journal). Also she says crystals can amplify energy, are transducers and semiconductors among other things.

MJ Pangman discusses the significance of liquid crystalline water​


View: https://youtu.be/Zfw7z6qkpwI

I think 'liquid crystalline water' is another term for EZ water/H3O2/structured water/hexagonal water. It's confusing how many different names there are for that stuff!

Not sure if it's useful but thought I'd post it anyway. Sheet quartz and 'fused quartz'/quartz glass are available but I imagine they'd be more difficult to work with (and more expensive) than the other components you're using in the QB.

Veda Austin's work is intriguing, I've not looked at it in much detail myself yet but it would be interesting to try to replicate what she's doing.
 
Last edited:
Did you guys notice this?

Do you think it's the water mixed with the 5% magnesium, or is it the paper with a bit of magnesium strip or something else?

They seem to have a square angles.

Any ideas?


20220709_214005.jpg
Screenshot_20220709-213724_Gallery.jpg
20220709_213657.jpg
20220709_213838.jpg
 
Last edited:
I think it is easy to misunderstand Tesla's words. I'm obviously not qualified to interpret the meaning of Tesla's words but from my own understanding I have to say that I think the phrase "around us" was only used because we lack a better term. English simply isn't well calibrated for an exchange of metaphysical ideas. It becomes important to remember what I said before. Transverse waves occur only at the border of a medium. If the dielectric field was really all around us (in space) at all times, how come light has transverse wave components then? An infinitely large body of water would never create transverse waves. How come light does it then? Well, that is because the ether is not around us in space. I would instead say that the ether is more like a "universal law" that can be invoked at any time from anywhere. At the end of the day, universal laws only exist because a common source for everything exists, that being the ether. Undoubtedly a difficult concept to wrap one's head around but to me it is the only logical conclusion.
I'm not quite sure what information to extract from the first link you posted. Could you elaborate?
I have scribbled and scribbled and now I think I should put this as simply as possible. I'm leaving the previous scribblings on the off hand chance they be worth having on record.

Let me restate this more accurately: The dielectric is all around us, but it's in an incoherent form, like a mist of shards of high pressure magnetic energy speeding through the embryonic sack created by the Sun which encases the entire solar system. Outside of that sack is another coherent medium.

Our star is moving through a higher pressure medium. This medium is unknown despite claims to the contrary. What we do know is it is the same material which creates magnetism.

The Sun casts off shards of the dielectric and these shards are high pressure bits whose innate nature is to join back with the high pressure field that they came from.

A magnet creates a pressure field of magnetic pressure. Any shards coming in reach move towards the higher pressure point which is at the core of the magnet. The magnet collects and loses shards at a common rate for the most part.

So a magnet is a kind of counter spatial dielectric trap.

All matter exists only because magnetism binds it together and thus gives it mass and volume. According to Wheeler, if the dielectric overthrows the magnetic then the body of matter enters the counter spatial field.

This is probably where the idea of worm holes really comes from. What I mean is that you can artificially induce a hole where you, your car, and the kids all fall into which has neither time, space/volume, or distance. Once that happens you are all instantaneously moved to another point where you're ejected back into another lower pressure field, and no worse for the wear evidently. There is never any recall of the travel as there is not space or time in the pressure field. All you know is one moment you were here and the next you're somewhere's else.
Many accounts of this including one of my own. We call that teleportation.

There are to my knowledge two kinds of triangular vehicles that look similar but are not the same. That's the black tetrahedrons, which are likely being propelled by phased array microwaves, and then the other which are the so called triangles. Triangles, at least some, can teleport. Those are almost certain to be galactic capable vehicles and of human construction. I don't think there's any doubt about that IMOP.

This machine overthrows the magnetic and enters the dielectric and vanishes because it's just moved to elsewhere instantaneously.
It's teleporting. How do you know this is human construction, well it's a form derived from the X-planes and it's a lifting body with tail fins so it can glide if it has to, but only from very high or extreme altitudes. Clearly human 100%.

Know how else I know??? Ya think this is accidental? Watch the whole video of the TR#B and tell me this bulb headed boob with his green spinning triangles are accidental. Notice the triangles/pyramids are set inside a sphere??? Remember Joe Parr...I keep saying...Joe Parr.
More later...but the point is, they are crossing and exploring the Universe while keeping us all enslaved here on this mud ball.





Mysterio_smoke.jpg
mysterio_cosplay_by_graysonfin_by_graysonfin_df5gjn6.jpg


____________________________________________________Previous scribblings on the matter_________________________________________-

Dielectric as you know ruffly means insulator. The dielectric field is insulated from our space. It is apparently a very high pressure field. This pressure field has been misunderstood as another dimension.

Since the dielectric field is responsible for creating magnetism then it must therefore be around us, but how can you have both a substance which is insulated from us and yet still all around us?

According to Wheeler the Star in front of our solar system is emitting and or casting off grated up bits of the dielectric field, shards if you will, and it's these shards of the dielectric field that have been and are interpreted as photon's in conventional physics.

However, photon's are in reality counter spatial shards of counter space itself, and these shards are seeking a counter spatial opening, or what Nigel has called the point of infinity neturality. Any magnetic field will suffice.


In Wheelerism the point of infinity neutrality is the point source for the magnetic field, and which is a point where any passing dielectric shards move towards, and that causes a point where there is nothing but pure dielectric. However, and this is important to understand, this is not an opening back to counter space.

We will return to this momentarily; so in Wheeler's theory the shards produce a magnetic field once these form a point where a cycling begins to take place, that is, where the incoming shards move to a point and then back out and around and back again and again. The field does not grow because far flung shards lose contact with the pressure field and go speeding off looking for another one.

They all just want to get back home is the gist of the theory.

This sets up a recycling of the dielectric moving towards a point and then out and back again, and any other shards passing by that come within the reach of the cycling magnetic field will then move towards the point source of the magnetic field.

Remember now, Eric dollard said nobody knows what the Sun is, but whatever it is, it's plowing through space and forming some kind of pressure zone in front of it, so it's possible IMOP that the deeps of space are really a vastly higher pressure field. This simplified view is akin to being like a ball being pulled through water and which produces turbulent conditions in it's wake.

This means we are in a void or pocket which at a lower pressure and hence we have all these phenomena we can't see grasp but really if you simplify it down we are in a bubble in the wake of a speeding ball and inside our bubble are the mists of the medium that the ball is speeding through; those being these teeny tiny shards of the dielectric field itself.

Pressure is the driver of matter and this is why a tetrahedron is capable of being the fastest and simplest of material forms when put under pressure, and that is due to the divergence between the tip and the tail.

*Hence my little experimental toy tetrahedron running over a paper tent with magnets underneath is to demonstrate that it is the magnetic pressure which is producing movement and not electricity in particles and this is because the logical explanation for a mathematically derived calculation that the smallest particle is a tetrahedron, must then be driven by something which is non electrical in nature as all nature is in motion; nes-pah?

Understand?
Nature does not use electricity as a prime mover: It uses pressure mediation.

So if magnetism is a pressure field, and magnetism is the result of incoherent dielectric shards of pressure caught inside a low pressure field, then the result is that these shards move to escape the low pressure, and what they are moving towards is any other high pressure field & which is characterized by magnetic pressure.

This also explains the reason the magnet have a set strength because as it's collecting high pressure shards, it's also losing shards as the field cycles, and those lost shards are them once more accelerating towards any other higher magnetic pressure field than the one they are in.

Magnetism is defined by singularity. It will always seek to join with itself.


Then also the field is moving at the velocity of magnetism which is fundamentally instantaneous and thus you have the illusion of a non-moving line of force, which was once before called a "ray." However these so called magnetic lines are actually moving, and this is proven by the fact that the ray's of magnetic energy are in fact a form of pressure; magnetic pressure.

All these bits of the dielectric are seeking to return to their origin, which is counter spatial located to our own, and as with all light it has no mass because it's pure dielectric energy. Also worth remembering here is that this energy is evidently holographic like in nature. In another epoch of time it might have been described as a ghost, or ghostly.

The movement towards any available counter spatial point is what defines the qualities of the phenomena of light. So as light slows through a medium such as water it will again instantaneously accelerate once free of the water, and so these shards of the dielectric are accelerating towards a point source towards a magnetic field.
 
Last edited:
Previous Post

The previous post was originally going to be put in another place and not in a public display but I accidentally posted it here.

My apologies as I'm catching up on the past posts and would otherwise have incorporated excerpts of previous post.

As regards this technology; some are aware that disclosure will never come; not for free energy or any other technology that is related, and that is because the technology is being used for social engineering. Social engineering is a fancy name for organized crime and specifically for crimes against humanity.

Read This: Why you will never find disclosure.
Black ops UFO Research funded by Illegal Drugs

The idea here and not meaning to distract from the battery with these posts, but which cannot be helped, is that I see all the material in this thread as related to each other. I think you will too in due time and it does take time to assimilate and digest.

The significance of the postings here, especially by some others, can be tied back to spinoff's involving the mRNA technology and other super natural like technologies.

I apologize for time delay in replying and the length of the previous reply: Perhaps it could be put more clearly and in shorter form.
___________________________________________________________________________________________________________________________________________________
Regarding the Bulb headed Boob and dielectric induction
IMOP We are being shown something here of significance.

*
First off, If you're mystified by the green color of Marvel's Mysterio's green triangles then just look through the UFO video's taken with night vision scopes. There you are certain to see many examples of glowing green triangles zipping about the heavens. The one below is a rather poor example but you get the idea.
r-2011-INFRARED-UFOS-large570.jpg
WATCH: UFOs Over California?

Dielectric Induction;
Experiments by Wheeler shows that the induction of the dielectric field occur at three points on a circular plane. This was done by melting and then casting an ingot of pure bismuth poured into a shallow curved circular mold. The mold used was the concave circular impression stamped in to the bottom of an aluminum pop can. At three points around the casting are noticeable indentations forming the classic image below. Almost all early UFO's have half bulbs projecting out the bottom of a circular plane at three points. Bottom image German Archives; probably a wooden mock up held to the sky for effect. Early Virl Designs used circular hat box structures instead of the later more commonly seen half balls.

fposter,small,wall_texture,product,750x1000.u2.jpg

ufotypes2Flying Disc of the Bundeswehr .jpg




_____________________________________________________________________________________________________________________________________________________
Nigel's QB; Is it a Negative Entropy Machine?

Nigel's QB seems to be a negative entropy machine. This is nothing to brush over lightly. In fact all magnets are a kind of negative entropy device.

Historically it would be related to an engine known as the Karl Schappeller Device; a device which was formulated to operate on the theory of negative entropy. (See mikewatson posts at the link , especially the one giving a good description of the philosophy of entropy) Karl Schappeller's Secret Sublimate for his Electret!

"Schappeller’s machine is an negative entropy converter increasing order from disorder like a tree or plant, opposite to a car engine (and all modern machinery) which produces disorder form a relatively order input in the form of hydrocarbon fuels created by the life process of trees millions of years ago. "
By Mike Watson ~ Karl Schappeller's Secret Sublimate for his Electret!


One of the most secret parts of the Schappeller device was it's electret. Electret's were originally discovered in 1925. An electret is a piezoelectric polymer; noting here the previous excellent posts on Water and structured water. The cited link at overunity explains what this electert compound was composed of.

We know this device was real because Scottish Engineer Cyril Davson studied it for 3 years and wrote a book on it. Unfortunately this book really is useless and I am sure he intended that since he was friends with Karl Schappeller. Still you can read it and I have done so myself.
THE PHYSICS OF THE PRIMARY STATE OF MATTER And Application Through the Primary Technique : Cyril W. Davson : Free Download, Borrow, and Streaming : Internet Archive

Further more, an associated with postings on crystals, water, and structured water;

The Nazi's production of heavy water in Telemark Norway might well have had more to do with flying saucers than it had to do with the story a German attempt to produce a supposed super bomb. The factory that made the heavy water was owned by Klaus Schawb's father. It still remains to this day and there's a link at the site below on Klaus Schwab who is a NWO barker.
KLAUS SCHWAB IS THE GREAT BARKER OF THE FOURTH REICH
Bohaterowie Telemarku (1965) - IMDb

I found this which is good info on the on-going development of electret's: Apparently research is still silently creeping along un-noticed.
Electroactive Polymers - History of EAPs | History EAPs
Electroactive Polymers
electret | physics

The Schappeller device is referred to as a a prime mover which is military parlance for motorized transport and motors in general.

After the Nazi's took power Karl's work was absorbed by the SS and appears to have been handed over to a select team of scientists for further development. Interestingly Schappeller had associations with Rudolf Steiner who was persecuted by the the Nazi's. These people had a different approach to thinking and imagining how things work, which is where this idea bout negative entropy comes from.

Rudolf Steiner | Austrian spiritualist
About Steiner


One member of this team appears to have been the famous scientist, since down graded by wikipedia, google, and others as being nearly insignificant, as their bio's have been revised several times over the last decade. Nevertheless, it is Otto Schumann who is credited with the discovery of the Schumann Resonance, though that award is not recognized till the 1950's and post WWII, but a reading of the Vril Saucer designs, along with it's so-called Schumann levitator, does make it obvious that the theory of Earth's resonance was worked out before the end of the last global war.

One can draw the conclusion the invention of Karl Schappeller is directly related to the Virl Sacuer designs by comparison between the drawing. They appear closely related and so it is highly likely IMOP that the Schumann Levitator was derived from the work done by Karl Schappeller on his prime mover. Of course it took the genius of Otto Schumann along with other German Scientists to put it all together but the Vril designs evolved out from the Schappeller Device. The point being there is an evolutionary path which is traceable and which begins with a type of motor.

_________________________________________________________________________________________________________________________________________________
Joe Parr
What we know of Joe Parr and his work is thanks to Dr. John DeSalvo who retains proprietary rights so please visit his site to view the drawings, photo's and notes of Joe Parr. I do not hesitate to say this information is critical because nature does not work as advertised.


Joe Parr was an electrical engineer by training and a creative free thinker by nature: Great Pyramid of Giza Research Association

A synopsis of Joe's own personal investigative work can be read here: Experimental Research on Shape Power Energies

What I have culled out of the ether is that Joe Parr worked for an unknown contractor on a classified project in Antarctica where he told Dr. John that overhead flew a B-52 Bomber, and there's only one reason you would have a B-52 Bomber flying 24 seven over head in the early 1960's, and that's because it was carrying thermonuclear weapons as a safety, or last ditch, but as to a last ditch safety to what is unknown.
Gives a whole new meaning the the term hostile work environment.

Dr. DeSalvo has said that Joe never told him what he was working on but that snippet of information regarding a strategic bomber flying 24/7 overhead, and when combined with Joe's own experiments, which can be seen at Dr. John's site, leave no doubt that it could only have been one of a limited number of possibilities. Either Joe Parr was trying to decipher an alien vehicle, or he was trying to decipher a Nazi flying saucer. It has to be one or the other because really the only other possibilities are a Star Gate or a Weapon, both of which would be related to the same technology.

Joe Parr discovered what the bulb headed boob is showing us. It really is just about that simple. Joe found that spinning a pyramid shape, which is a triangle in 2D, through alternating magnetic fields produced an energy field of unknown type, but which would grow and expand and was capable of blocking out all know forms of energy including gravity and gama raysz; This would be especially handy for home defense.

What Joe really did was to discover what the bulb headed boob is showing us and once you realize this then more falls in to place.


________________________________________________________________________________________________________________________________________________________
Mysterio, A Bulb Headed Boob?

Marvel's character Mysterio, head is is a direct reference to the discovery of Joe Parr and it's symbolic of the spherical energy field which Joe Parr discovered through his experiments. It is my opinion that the video of the supposed TR3B is showing us this same phenomena when it makes this jump to hyperspace.

Mysterio's spinning triangles are overlaid turning one against the other and forming a merkaba taking in the dielectric field from 3 points in two counter rotating planes inside a single circular space.

Paying Attention~
Every advanced civilization that has ever existed has been built on slavery of one kind or another. This is as true today as it was in the past, which today has included China, Korea, India, Mexico, virtually all of South America.

The seriousness and ...cough...gravity of our own situation is that we all are part of grand plan which has produced a collective cultured psyche that has developed a virtually cult like belief in aliens and the belief that anything not understood must be of alien origin.

The brilliance of the human mind as an explanation for UFO's and other unknown's is attacked, dismissed, corrupted, ignored, re-written, burned: Aliens did that too huh?

We are all now the unknowing prisoners on an imprisoned planet. We are to be treated as cows are treated. Jabbed, tagged, herded, and slaughtered as needed: There to serve the needs of others. This really is the current situation even if unrecognized by most.

You and I are now as helpless against this power as you would be against any other collective of Marvel Comic Superman.

I really should not need to harp on the slow burn feed of psyop's which surround our daily lives, most all of which we are totally oblivious to recognizing as psyops; whether it be the fanciful cow motifs, which people are self identifying with, or the one about planetary destruction by meteors; a theme told to us via Carol Rosin via the disclosure project, and which is especially interesting considering the origins of flying saucers are clearly terrestrial, and that Carol's source for this revelation was none other than Wernher von Braun.

____________________________________________________________________________________________________________________________________________________

Crop Circles; aliens, humans, collective psycosomatic induction?
http://www.cropcircleconnector.com/anasazi/cropcircleresearch Archives 2017.html

I don't think we can answer this right now, not in total, but for sure there are crop circles which are clear and clearly not made by aliens nor by hoaxers, which really leaves only one possible explanation. Now as to who is doing this and why might be related to the bulb head boob.
We are being tested. If none of us can figure it out, if none of those who do are willing to share, then none of us are developed enough to deserve to be treated as any more deserving than a cow on a farm.

I recommend reading Jerry Korth's analysis of this crop circle: Hint... magnesium and florine
I think the Professor here has missed seeing this as a pyramid, which is then a prism, but he's seen things in a way I myself would not have.


collectivepsych.com
Solar cell crop circle(1)
Solar Cell Crop Circle | PDF | Quantum Mechanics | Quantum Entanglement
 
Last edited:
@3D Printing Bear is there any updates on this research ?

How can Nigel get 1 volt of frequency resonance of a 10 cell QB , 7 volts when touching south side and 25 volts when touching north side?

This blows my mind. Please help
 
@3D Printing Bear is there any updates on this research ?

How can Nigel get 1 volt of frequency resonance of a 10 cell QB , 7 volts when touching south side and 25 volts when touching north side?

This blows my mind. Please help
Great question I'm still learning to properly answer, but I'll do my best. The resonant 1V isn't surprising just because the QB has voltage potential just sitting there, and I imagine with the probe wire connected there's an atmospheric charge interacting with it. As for him getting higher/lower voltages depending on where he touches (i.e. grounds) the QB, I believe that's simple him creating the circuit and different cell points along the length of the battery. It appears that form end-to-end the top end of the potential is around 25V which you would theoretically get by touching multi-meter probes to each end. That being said, the QB's do act as a variable power source by the nature of their stacked cell-based design. That function can be used in all manner of ways and applications depending on what the QB is powering.

As for updates; nothing at the moment. I've been extremely busy at home and at work so my experimentation time has been drastically limited. Once a few major projects are done I can re-focus how I need and build larger QBs using newer designs. I'm also going to test out ceramic magnets for their effectiveness. If what Nigel mentioned to me is true it could be possible to build these quite inexpensively, which I'm ALL about discovering and sharing. I have far more plans, prototypes, and experiments in my head for this research than I can easily list or describe here. I'm starting to think a collaborative site or app of some kind would be useful to start where I can put my findings up, but picking the right place is not trivial. When I do figure out something I'll be sure to post it up here.


---------------------------------------------------------------------------------------------
Did you guys notice this?

Do you think it's the water mixed with the 5% magnesium, or is it the paper with a bit of magnesium strip or something else?

They seem to have a square angles.

Any ideas?
Good question here but it's hard to say. I've never asked him specifically and didn't feel it was relevant, but I do think it is just the drop of 5% magnesium solution on each piece of paper. While they do look kind of square I think he would have mentioned if there was another material he was using. I'm not 100% sure though.
 
Last edited:
Guys, you need to look over this material. I haven't got a lot of time at the moment. Specifically I'm aiming you towards the material by David LaPoint.

I am sorry for being away. Just too much happening and little time.

I had no idea LaPoint's info existed but It's been around since 2013.
Please send the LaPoint info on to Nigel's team if they are unaware of it.

It is important to understand that LaPoints work is spawned from the work of renowned scientist Anthony L. Peratt.
Frankly you can't get better than either of these two. LaPoint is himself an astrophysicist so this is all tied together by two people who know what they are talking about.

This link is probably Peratt's most significant premier on high energy Z-pinch's recorded in antiquity. Scanning over this will help to make the connections to David LaPoint's video's. You would be well advised to do more than just scan over it.
https://plasmauniverse.info/downloads/PerattAntiquityZ.pdf

Anthony L. Peratt made some famous interpretations of paleolithic picture drawings found the world over as prehistoric depictions of a high energy Z-Pinch's. These may have been responsible for the Grand Canyon BTW. These pictograms were all misinterpreted for decades. They have since been proven out in lab experiments as accurate depictions of high energy Z-pinches.
TheUniverse
Plasma Scientist Anthony Peratt Meets the Electric Universe – The Thunderbolts Project™

OK, so now that's the back story to the work of LaPoint. It's really LaPoints creation of magnetic bowls is why I'm posting this. I am myself only about half way thorough the video's and reading material.

I think this could be what we need.

Primer Field Series by David LaPoint | Aether Force
Ice Age of the dimmer Sun in 30 years - 4 Primer Field Dynamics

Report Edit
 
The idea here is to decipher the whole and I think Nigel has shown power generation is possible and that it's tapping into an apparently limitless supply field, and so now the issue is how to expand upon Nigel's work and I think LaPoint is giving us a possible answer to that problem.


Also it's worth noting that Clif High has found Nigel's work and that is a good sign for the linguistics forecast of new electrics; a new understanding of energy/unknown energies from space.
SciFi World

Right now it looks to me like David LaPoint points the way forward with Nigel's battery, and to do so with an addition to the battery scheme spinning LaPoint style magnetic bowls.

I would recommend disregarding previous ideas in lieu of the LaPoint information.

Check this link out. We know that magnetic fields change the rate of growth and can change positively or negatively the effects of disease and injury. Check out the link for more.
PrimerField Foundation

Using one or more of LaPoint inspired magnetic bowl does appear as evidence in antiquity which say's to me that the power generation of the God's Thunderbolt weapons was based on the LaPoint understanding. You can clearly see what looks to me like a near exact copy of the LaPoint plasma generation system this in the depictions of the God's Vajra.

See Rex Research for extended info; patent links & bowl construction ect.
David A. LaPoint Primer Field Theory / Experiments -- articles & patents

David LaPoint's free info.
PrimerCube Tech Transfer – Dysk Google

More is needed to achieve the energy of the Gods my friends.



Compare the thunderbolt weapon of the Gods, the Vajra, with the work of LaPoint. You see the there are bowls on either side of the spherical center piece. Watch LaPoint's video's.
See this Archived discussion
SH Archive Replies - Weapons of the Gods: Vajra, Dorje, etc...
vajra_symbol.jpg
vajra-ouvert-ferme-wkp-ski-1900X1141px.jpg
 
Last edited:
I love the research of free energy, cause I think we are totaly screwed; the universe is full of energy; magnetisme, resonance. frequenties and more we do not yet know. But what is free can not be billed or patented and the evil PTB only core is to own everything, everybody and every thoughts (witch consumes most of the body energy) and drain it for there own purpose.
In the book from R. Guépin (One Eye in the Land of the Blind) you can read how Viktor is being frustrated by institutes.
I feel that the human race is being drained and being fooled by NASA's fakery, MSM lies, economic slavery, medical prisons, food delusions, faked energy shortage (oil is not fossile!) and climate hysteria.
The only purpose is to profit. But they will fail, cause nature/the universe has one deep wisdom and that is Balance and Harmony.


View: https://www.youtube.com/watch?v=zSff0pwc1Xc
 
Last edited by a moderator:
So a magnet is a kind of counter spatial dielectric trap.
Battery Tech better than Nigel Cheese, Tesla, or Walter Russell

You need to read this



(oil is not fossile!)

If the science 'theory' cannot explain exactly what "oil" is... and how the Earth Makes it and then duplikcate this in the Lab.
Then the "theory' is suspect.

This thread may enlighten the readers. Walter Russell's Periodic Chart of The Elements
and in particular our reproduction of the Bias in the Field Polarity that Electro-Magnetically restructures water into Oil.


View: https://rumble.com/vhodfb-full-unedited-version-of-oil-from-water..html
 
The best part it that everything is pointing to the same truth.

Flat Earth is the most important truth there is because it exposes every single lie and every single psyop created by the criminal #PsychopathsSociopaths #Liars that are lying ,controlling and destroying our lives and future generations lives forever through their agendas and organisations . That is why no-one from any corporation is willing to help Nigel , nor will free energy be discussed in public for the masses to acknowledge. They will try to suppresse it at all cost.

David LaPoint is the perfect example of how Flat Earth model works. I've seen Nigel exposing the same principle where North is the center and every way around is South. They are both exposing Flat Earth model but they don't know it yet..

Hope some day they acknowledge it.
Our Earth is a closed system and a perfect battery. The controllers know it and don't want you to know it.

Regarding the QB how long can you make them active with a 3mm whitr led light?

Is it normal to have them run for 7 days without adding extra moisture ?
 
How is it possible to have a max of 24 volts from a 10 cell QB and also comparing to a bigger one (80 cell version) also and only have 24 volts?

What Am I missing ?

If a 10 cell version can produce 24 volts, it means Nigel configuration can produce 2.4 volt per cell. I wonder if and what electrolyte was used.

If 10 cell version produces 24 volts the bigger one with 80 should not only produce 24 volts at peak.

Again : what am I missing ?
 

Attachments

  • Screenshot_20220804-103508_Gallery.jpg
    Screenshot_20220804-103508_Gallery.jpg
    294.1 KB · Views: 90
  • Screenshot_20220804-103423_Gallery.jpg
    Screenshot_20220804-103423_Gallery.jpg
    291.3 KB · Views: 101
How is it possible to have a max of 24 volts from a 10 cell QB and also comparing to a bigger one (80 cell version) also and only have 24 volts?

What Am I missing ?

If a 10 cell version can produce 24 volts, it means Nigel configuration can produce 2.4 volt per cell. I wonder if and what electrolyte was used.

If 10 cell version produces 24 volts the bigger one with 80 should not only produce 24 volts at peak.

Again : what am I missing ?
3D Printing Bear mentioned that the increase in volts is not linear. I believe he said this much in one of his videos on the QB. A theory is that the increase in resistance eventually "overthrows" the volts gained with each cell. I experienced this myself when I replicated the QB. More cells is not always a good thing.
 
Tips
Tips
Please respect our Posting Rules.
Back
Top